ZINC AEROSOL BRIGHT 400ml CRC - SPECIAL PRICE
2087
Zinc
Description
Product Code: 2087
Description: CRC Bright Zinc 400ml Aerosol
Number Pieces: 1
Brand: CRC
Specs:
Touch Dry: 15-20 minutes
Full Cure: 24 hours
Time To Overcoat: 1 hour
Clean Up With: Mineral turpentine or white spirits
Aerosol: 400 ml
Notes:
CRC Bright Zinc unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible resin coating for heavy-duty protection and a bright finish of new galvanising.
Pure zinc particles are embedded in a resin system which forms a quick drying highly protective coating on bare steel or iron, with more than 50 percent highest purity zinc in the dried film.
This organo-zinc coating provides an effective barrier for protection of treated surfaces from environmental conditions like moisture, humidity, water and heat while the zinc particles -due to sacrificial anodisation of zinc - stop rust and rust creepage if the coating is scratched, abraded or dented.
CRC Bright Zinc provides a gloss top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion.
CRC Bright Zinc is ideal for touch-up and repair of damaged galvanised surfaces and effective long-term rust protection with the bright look of a newly galvanised surface.
For ultimate protection, prime the metal surface with CRC Zinc It then apply CRC Bright Zinc as a top coat.
CRC Bright Zinc provides excellent cover and is capable to be applied as a heavy film for extra protection without forming runs, delivered from a unique aerosol system giving a smooth even coat.
Ongoing protection can be achieved through simple re-coating within 5 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.
FEATURES
Zinc-rich - More than 50 percent highest purity zinc in the dried film, embedded in a protective enamel coating
Protective Coating - Resistant to salt corrosion, water and heat. Powerful protection in harsh conditions
Bright galvanised finish - Ideal for repairing damaged galvanised surfaces to restore rust protection
Excellent adhesive qualities - Forms a tough coat for long-term protection
Easy application - High film build in one step
Heat Resistance - Up to 120 degrees Celcius
Long-term corrosion protection - Corrosion Protection Factor 60 (up to 5 years outdoors before recoating is necessary, depending on conditions)
Sacrificial anodisation of Zinc - Stops rust and rust creepage even when scratched, abraded or dented
Fast drying - Touch dry in 20 minutes, recoat immediately, full cure in 24 hours
Easy re-application over existing film and/or clean surfaces - For ongoing protection
Single coat - No overcoating required. For additional protection, prime the metal surface with CRC Zinc It prior to applying CRC Bright Zinc
Ready to Use Aerosol - No additional mixing or chemical additives required. Easy application. No clean up
Does not contain CFCs, methylene chloride
MPI Approved C23
ALSO AVAILABLE IN
Black
Yellow
White
Green
Orange
Blue
Red
Copper+Zinc
Stainless Steel+ Zinc
Questions?
You may also like
ZINC 1 LITRE PURE CRC
